CATEGORIES: HOME REFLEKSI SCHOLARSHIP BEASISWA AWARDS ISLAM IT KERJA JOBS

Thursday, September 26, 2013

[vacancy] Digest Number 4869

2 New Messages

Digest #4869

Messages

Wed Sep 25, 2013 9:41 pm (PDT) . Posted by:

migasjob

OPERATION SUPERINTENDENT (Forklift & Trailer)
(Assignment: Kalimantan Timur) Managing fork & trailers
operations teams to deliver the most efficient and profitable
manner and meet the clients contractual requirement. HSE
leadership is compulsory and the work scope not limited to :
1. Work with scheduler to set scheduling of daily equipment
operations
2. Communicate to mud / cementing companies & advise to cutting
/mixing products scheduling refer to projected workloads
3. Manage all cargoes transfer rate from Jetty – Storage
vice versa always up to standards targeted
Requirements:
1. Min. Bachelor degree, preferably from Mechanical or Electrical
Engineering
2. Min. 10 years professional experience, with the last 5 years
in supervisory level preferably in Oil & Gas Company
3. Have strong leadership to supervise and manage, including
disciplinary action
4. Able to develop and encourage subordinates, motivate by
respect and avoid favouritism
5. Ability to communicate effectively both oral and in writing,
with Clients, subordinates, superiors and other third parties
related to base operations
6. Good command in English both verbal & written
7. Understand HSE principle in all aspects of Base Operations
8. Computer literate (Advance level in Ms. Office : Word, Excel,
and Power Point)
9. Must be available for on-call duty in emergency situations
10. Willing to work extended hours to meet project targets

Responsibilities:
1) NIL Industrial & Environmental Incidents

2) Real effort and reinforcing subordinate to improve their
absenteeism performance by :
Set a good example to have self-good absenteeism & no late to
work Ability to act as counsellor to awaked subordinates
behaviour
3) Provide leadership to all workforces by promoting most
friendly work environment and mutual respect
4) Responses all people/ organizations issues & raise the issues
on the Weekly Supv meeting
5) Clients Interactions:
Acting as a professional service provider to provide a solution
to helping clients out – from their difficulties
Knowing clients expectation prior they ask a question –
proactive approach
6) Related to cutting & mixing Intensify communications to
clients/service providers with the output of optimizing
Equipment( Forklift & Trailer) efficiency and well planned
services execution
7) Work closely with scheduler to set and plan equipment
(forklift/trailer) availability into 24 hour daily planning sheet
8) Intensive communications to Maintenance Superintendent to info
the Lifting work planning and manage the forklift/trailer
availability
9) Ensure equipment delivery & operators reliability to work area
is done in timely manner
10) Have strong commitment to equipment operation are operate in
accordance with the SOP and has ability use his authority to halt
the equipment operation considers dangerous to proceed
11) Consistently develop professionalism of operators by coaching
and mentoring them to follow Work instructions


OPERATION SUPERVISOR
(Assignment: Kalimantan Timur) Plan and prepare resources needed
for job execution and choose the most efficient, safest and cost
effective method of moving, loading, and unloading materials in
accordance with POSB WI/Procedures; and ensure that all equipment
is used in accordance with its inherent design capability
Requirements:
1. Min. Bachelor degree, preferably from Mechanical or
Engineering Major
2. Min. 5 years professional experience, preferably in Oil & Gas
Company
3. Have strong leadership to supervise and manage, including
disciplinary action
4. Able to develop and encourage subordinates, motivate by
respect and avoid favouritism
5. Ability to communicate effectively both oral and in writing,
with Clients, subordinates, superiors and other third parties
related to base operations
6. Good command in English both verbal & written
7. Understand HSE principle in all aspects of Supply Base
Operations
8. Computer literate (Advance level in Ms. Office : Word, Excel,
and Power Point)
9. Must be available for on-call duty in emergency situations
10. Willing to work extended hours to meet project targets

Responsibilities:
1) Attend Pre shift handover meeting and take notes to
prioritizing work base on MSR list.
2) Pro-actively getting positive feedback & questions during
handover shift meeting.
3) Daily walk patrol to maintain housekeeping & safety issues
finding.
4) Enforce riggers to check lifting tools consistently and ensure
it is has valid color code, ID, SWL, and proper certification.
5) Reject any lifting equipment / cargos which do not comply with
offshore standard requirements and raise CRN when found
non-conforming cargo and follow up to Client for the proper
corrective action.
6) Lead pre-start meeting regarding work plan and Inspections of
work area prior to job execution.
7) Communicate and plan with Lifting Superintendent & Stevedoring
Superintendent to prepare, arrange & select riggers / equipment
in timely manner.
8) Inform Control Room upon MSR completions about the resources
usage : i.e equipment, number of labour, delay hours and work
duration.
9) Provide JHA and Risk Assessment for non routine operation and
conduct PTO for the task being executed.
10) Ensure all control indicators are stated in the JHA and / or
Risk Assessment is implemented and right to stop the job if
identified is unsafe.
11) Choose on the most efficient, safest and cost effective
method of moving, loading, and unloading materials as per POSB
WI/Procedures.
12) Socialize JHA and SOP to all worker involved prior MSR
executions.
13) Leadership: Leading by example to improve workforce's
time keeping and discipline.


RIGGING & LIFTING SUPERVISOR
(Assignment: Kalimantan Timur) Coordinate all aspects of rigging
activities, ensuring clients compliance with all relevant
regulatory and certification requirements of POSB procedures; and
responsible for performing various assessment lifting gears for
POSB operation.
Requirements:
1. Min. Bachelor degree in Mechanical Engineering or Engineering
major.
2. Min. 5 years professional experience in rigging and lifting
area
3. QA/QC Certificates
4. Wire rope inspector certificate ASNT NDT certificate minimum
level II
5. HSE Certificate, Lifting Equipment Certificate, AK3 Depnaker
Certification (Spesialis Angkat Angkut)
6. Ability to communicate effectively both oral and in writing,
with Clients, subordinates, superiors and other third parties
related to base operations
7. Good command in English both verbal & written
8. Understand HSE principle in all aspects of Base Operations
9. Computer literate (Advance level in Ms. Office : Word, Excel,
and Power Point)
10. Must be available for on-call duty in emergency situations
11. Willing to work extended hours to meet project targets.

Responsibilities:
1) Manage lifting and rigging equipment is certified for current
use as per standard/code adopted and in good working through
pre-use inspections.
2) Prepare, plan, issuing and closing of lifting permit /lifting
study and ensure lifting operations are conducted as per lifting
plan /lifting study.
3) Ensure Testing and certification, identification and marking,
inspection and through examination, record of list of lifting
gear and CCU are conducted properly as per standard/code
adopted.
4) Knowledge and proven experience of international standard
(e.g. BS, DNV, API, ASME, AS etc.) relating to lifting and
rigging practices.
5) Manage lifting equipment is properly inspected prior to use.
6) Manage defective lifting equipment is isolated / quarantined
and dealt with in accordance with policy.
7) Decide the correct method of lifting is employed using a load
plan and other available tools / information.
8) Manage all lifting equipment is properly stored in rigging
store.
9) Ensure the correct lifting equipment and technique is employed
at all times.
10) Ensure Inspection of lifting gear and CCU (i.e. wire rope
slings, shackle, lifting pallet, pipe stacker, harness, ladder,
etc.) is comply with the requirements
11) Liaise closely with the POSB training Superintendent to
ensure that adequate training is afforded to rigging personnel.
12) Ensure adherence to colour coding procedure by self, client
and subcontractor.
13) Ensure Inspection of CCU and lifting gear is conducted
properly for in-service damage: cracking, corrosion, wear,
broken, heat damage.
14) Ensure welding activities for repair/alteration of CCU in
accordance to welding requirements as per standards/codes adopted
15) Ensure all CCU after a substantial repair or alteration is
carried out must be undergo examination and tests such as visual
Inspection, NDT inspection, and test properly
16) Ensure load protection, rigging, lifting & slinging safety
principle and Analysis of lifting gear and rigging in accordance
to POSB Procedures, and standard/code adopted.


SPECIALIST TRAINER (WELDING/FABRICATION)
(Assignment: Kalimantan Timur)
To provide training program and assessment for PTP Asset
personnel in the field of Welding and Fabrication to ensure that
Asset personnel are competent in the identified competencies for
their position, continues improving welding & fabrication
technique and best practices standard, and comply with company
policies and procedures.

Requirements:
1. Min. Senior Technical High School and/or Apprentices graduate
(preferable from Diploma graduate in Engineering)
2. Minimal 5 years having experiences as a trainer in HE Welding
& Fabrication in the field at high risk industry in Mining or
Oil and Gas Company.
3. Good knowledge about the Heavy Equipment and mining process
4. Good Leadership and communication/presentation skill
5. Good communication in English both verbal and writing
6. Good Computer literate
7. Willing to travel to all company's sites
8. Willing to work extended hours to meet the objectives.

Responsibilities:
1) Implement relevant PTP HSE policies and procedures IN ORDER TO
ensure that operations run without interruption due to HSE
issues.
2) Develop, review and implement Welding and Fabrication Training
and Assessment process, and ensure its implementations in
accordance with Petrosea's training procedures at all
sites
3) Assist Project Training Coordinators to conduct Training Needs
Analysis IN ORDER TO ensure that welding & fabrication training
is conducted in order to satisfy site competency requirements.
4) Develop and review Welding & Fabrication training modules and
assessments, in order to maintain the quality always meet the
requirements for all sites
5) Deliver effective Welding & Fabrication training in accordance
with Company Policies and Regulation IN ORDER TO maintain and
upgrade all Welder competency levels in accordance with position
competency requirements.
6) Monitor post training performance of Asset personnel
conducting welding & fabrication activities IN ORDER TO ensure
that the training has been conducted effectively
7) Develop and review weekly / monthly training report and then
submit it to the Training Superintendent/ Supervisor


SYSTEM ANALYST
(Assignment: Jakarta)
Responsible in analyst and recommended of system related to and
supporting Asset Management Operation becomes more efficient and
effective.

Requirements:
1. Minimum Higher education Degree (Bachelor/S1) in
Engineering/IT with minimum 3 years experiences
2. Strong knowledge and concept for Asset Management Operation
3. Experience as system development and analyst for Asset
Management operation, mining industry most preferred
4. Experience/Familiar using EAM / CMMS program,
5. Good English (Verbal and Written)
6. Excellent Computer Skill
7. Willing to work in Jakarta with some travel to project/sites
in remote areas

Responsibilities:
1. Responsible for continuous improvement existing all system
related to Asset Management Operation in order to put in place
the system which is efficient and effective
2. Recommended for improvement of system related to Asset
Management Operation with regard to Petrosea future business
projection
3. Integrated all system related to Asset Management Operation as
centralized system
4. Recommended system selection that suitable and effective for
supporting Asset Management Operation


TRAINING SPECIALIST
(Assignment: Kalimantan Timur) Performs technical training
programs, such as lifting, rigging, and heavy duty equipment
training and assessment.
Requirements:
1. Minimal Diploma degree from any discipline.
2. Having min. 5 year experience operating HD equipment (Crane,
Forklift, Trailer, etc.)
3. Good public speaking skills for training groups of employees
4. Must have strong verbal, written and interpersonal
communication skills.
5. Able to create module /syllabus for training program (Petrosea
property right)
6. Computer literate (Intermediate level in MS. Office : Word,
Excel, and Power Point)
7. Good command in English both verbal & written
8. Willing to work extended hours to meet job objectives
9. Valid Driving License B2
10. Valid SIO Migas Certification for Crane & Forklift

Responsibilities:
1) Instructs / teaches / facilitates in-house training programs
for lifting, rigging, and heavy duty equipment.
2) Develop and organize training manuals, multimedia, visual
aids, and other educational materials.
3) Ensure that all activities are carried out according to the
safety procedures.
4) Follow up finding base on incident happen and do for refresh
lesson learn (Phases).
5) Conduct orientation session for new hire or operators on new
unit equipment.
6) Support POSB operation for moving / loading-unloading unit on
POSB site during lack of operator on site.
7) Assist Training Supervisor in KIMPER Training and assessment.
8) Monitor on KIMPER progression for operator and its progress on
the operational

We offer our staff a challenging and innovative work environment.
An attractive salary package will be negotiated to ensure a high
caliber appointment.
To apply for this position, please send your application together
with a detailed resume including recent color photograph,

To apply pls visit to our blog www.nautic-resources.com

Wed Sep 25, 2013 9:41 pm (PDT) . Posted by:

migasjob

One of our client currently recruiting for a Mechanical and
Rotating Equipment Engineer to work for a major operator in the
oil and gas industry. The role will be based in Paris and then
moving to Japan on a residential basis


The Service Provider shall lead and coordinate the
mechanical/rotating and packages studies of the project.

Call for, participate to and/or organise all the necessary
technical and/or co-ordination meetings required to achieve the
performance of the work.

To supervise LNG plant detailed design of relevant discipline and
provide assistance/support to pre-commissioning,
commissioning/start-up preparation teams.

To ensure PLANT mechanical and packages design consistency,
optimization, operability and flexibility which implies
interfaces management and leadership towards other packages,
such as wellpads and marine port.

To ensure that the PLANT detailed design for mechanical packages,
equipment and rotating machines, in particular the large ones
(gas turbines and compressors) complies with S.O.R., contract
documentation, schedule, budget and safety practices.

To avoid LNG plant EPC contractor stand-by/delays by prompt
response to engineering queries and request for waiver (if any)
and unexpected technical issues, by a proactive and proefficient
approach.

To support the OBT related activities for this discipline.

MISSIONS

1. To monitor and highlight the interfaces within the LNG
plant EPC packages (in particular with process, operations,
civil, electrical and control systems disciplines) and with the
other packages of the PLANT in relation to this discipline.
2. To participate in technical reviews during the detailed
design execution: to provide support and expertise and
contribution with regards to this discipline.
3. To ensure proper reporting, highlighting critical issues to
the Engineering Manager/OBT Manager and proposing remedial
actions.
4. To contribute to improving the project lessons learnt and
personnel skills.
5. To contribute to the advancement of working methods and
tools within his speciality.
6. To advise the Engineering Manager/OBT Manageron solutions
to this discipline.
7. Ensure that the design of installations meets the
requirements of the project specifications, Safety Concept,
S.O.R and other related documents.
8. Guarantee the quality of mechanical/packages and rotating
equipment related studies and associated deliverables. Monitor
and coordinate the LNG plant EPC Contractor and guide the design
of the installations by close participation in the design
activities, review and comment on the corresponding detailed
design deliverables.
9. Follow up, control and comment all equipment/packages
handling-maintenance documentation in close collaboration with
the operations and maintenance specialists.
10. Provide assistance to the Engineering Manager/OBT Manager
and Area Project Engineer for the preparation of the
subcontracts for Long Lead Items (when applicable).
11. Participate in technical meetings, challenge the EPC
Contractor, monitor and promote cost saving solutions in the
design. Promote alternatives design to optimize works and
schedule.
12. Report to Engineering Manager/OBT Manager on progress of
his activity and on changes to basis for design, as early as
possible, when anticipated, anticipate problems in his
disciplines and inform Engineering Manager/OBT Manager.
13. Ensures that the mechanical/packages/rotating equipment
related engineering activities are performed in order to execute
project as per Company know-how, with required level of quality,
safety and with respect of environment, within the agreed time
schedule and cost.
14. Participate to the critical equipment Factory Acceptance
Tests.




To Apply pls visit to our web : www.nautic-resources.com

GROUP FOOTER MESSAGE
____
40000+ members and counting.
No Spam. No Ads. No Bull. Just plain job posts.
Join us, send a blank e-mail to: vacancy-subscribe@yahoogroups.com
For jobs in India, send e-mail to: vacancy-india-subscribe@yahoogroups.com

===================

No comments: